3 Network Installation28 Xerox Phaser 3635 System Administration GuideLinux CUPSStatic AddressingInformation ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. See Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface,Information Checklist on page 13.2. Linux operating system that supports printtool.NOTE: Not all distros of Linux support printtool.Procedure1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the MachineUser Interface, Procedure on page 14 until step 38, then return to this page.Create the Print Queue1. Ensure that the Common UNIX Printing System (CUPS) is installed and started onyour client.NOTE: The latest version of CUPS is available at cups.org.2. Open the web browser from your Workstation.3. Enter http://127.0.0.1:631/printers in the Address bar.4. Press [Enter].5. Click on [Add Printer].6. The Authorization dialog box will appear.7. Enter the root and the root password.8. In the [Add New Printer] screen enter a name for the printer.9. Enter a location and description for the printer (optional).10. Click on [Continue].11. In the [Device] menu, click on [Internet Printing Protocol].12. Click on [Continue].13. Enter ipp://hostname/ipp/printername.Where hostname is the hostname of the Xerox machine and printername is theprinter name of the Xerox machine.14. Click on [Continue].15. Click on [Xerox] in the [Make] menu.16. Click on [Continue].17. Select the correct driver in the [Driver] menu.
