Keithley 2461 Reference Manual

Also see for 2461: Quick start guide Declassification and security instructions Quick start guide

Contents

Keithley 2461 Reference Manual Manual pdf 617 page image

Section 6: SCPI command reference Model 2461 Interactive SourceMeter® Instrument Reference Manual6-240 2461-901-01 A/November 2015:TRIGger:TIMer:STARt:OVERrun?This command indicates if an event was ignored because of the event detector state.Type Affected by Where saved Default valueQuery only Not applicable Not applicable Not applicableUsage:TRIGger:TIMer:STARt:OVERrun? Trigger timer number (1 to 4)DetailsThis command indicates if an event was ignored because the event detector was already in thedetected state when the event occurred.This is an indication of the state of the event detector built into the timer itself. It does not indicate ifan overrun occurred in any other part of the trigger model or in any other construct that is monitoringthe delay completion event. It also is not an indication of a delay overrun.This returns 0 if there is no overrun or 1 if there is an overrun.ExampleTRIG:TIM1:STAR:OVER? Checks the overrun status on trigger timer 1.Also seeNone:TRIGger:TIMer:STARt:SECondsThis command configures an alarm or a time in the future when the timer will start.Type Affected by Where saved Default valueCommand and query Recall settingsInstrument resetPower cycleSave settings 0Usage:TRIGger:TIMer:STARt:SEConds :TRIGger:TIMer:STARt:SEConds? Trigger timer number (1 to 4) The time: 0 to 2,147,483,647 s