Section 3: Functions and features Model 2461 Interactive SourceMeter® Instrument Reference Manual3-76 2461-901-01 A/November 2015Pulse commandsThe following table summarizes the Model 2461 pulse sweep commands, which are described inmore detail in the SCPI command reference (on page 6-1) and TSP command reference (on page 8-1) sections.Command DescriptionSCPI: :SOURce[1]:PULSe::LIMit[:LEVel] (on page 6-104)TSP: smu.source.pulse.xlimit.level (on page 8-192)Sets the source limit for pulsed outputfor the selected function whenpulsing.SCPI::SOURce[1]:PULSe:[:LEVel][:IMMediate][:AMPLitude] (onpage 6-105)TSP: smu.source.pulse.level (on page 8-190)Selects a fixed amplitude for theselected source function whenpulsing.SCPI: :SOURce[1]:PULSe:LIST: (on page 6-107)TSP: smu.source.configlist.create() (on page 8-177)Allows you to set up a list of customvalues for a pulse sweep.SCPI: :SOURce[1]:PULSe:LIST::APPend (on page 6-108)TSP: smu.source.configlist.store() (on page 8-182)Adds values to the source pulse listfor the selected source function.SCPI: :SOURce[1]:PULSe:LIST::POINts? (on page 6-109)TSP: smu.source.configlist.size() (on page 8-181)Returns the number of configurationindexes in the source pulse list for theselected source function.SCPI: :SOURce[1]:PULSe:SWEep::LINear (on page 6-110)TSP: smu.source.pulsesweeplinear() (on page 8-194)Sets up a linear pulse sweep for afixed number of pulse points.SCPI: :SOURce[1]:PULSe:SWEep::LINear:STEP (on page6-113)TSP: smu.source.pulsesweeplinearstep() (on page 8-197)Sets up a linear source pulse sweepconfiguration list model with a fixednumber of steps.SCPI: :SOURce[1]:PULSe:SWEep::LIST (on page 6-116)TSP: smu.source.pulsesweeplist() (on page 8-200)Sets up a pulse sweep based on aconfiguration list, which allows you tocustomize the sweep.SCPI: :SOURce[1]:PULSe:SWEep::LOG (on page 6-118)TSP: smu.source.pulsesweeplog() (on page 8-202)Sets up a logarithmic pulse sweep fora set number of source points.SCPI: :SOURce[1]:PULSe:TRain: (on page 6-121)TSP: smu.source.pulsetrain() (on page 8-205)Defines a sequence of source pulsesand creates a trigger model togenerate the pulse train.SCPI: :TRIGger:BLOCk:SOURce:PULSe:STATe (on page 6-208)TSP: trigger.model.setblock() —trigger.BLOCK_SOURCE_PULSE_OUTPUT (on page 8-297)Defines a pulse trigger block thatturns the pulse source on or off.
