Panasonic MINAS A4P Series Instruction Manual

Contents

Panasonic MINAS A4P Series Instruction Manual Manual pdf 80 page image

80How to Use the ConsoleSetup with the ConsoleComposition of Display/Touch panelDisplay LED (6-digit)All of LED will flash when error occurs, and switch to error displayscreen. Display LED (in 2 digits) Parameter No. is displayed at parameter setup mode. Point No. isdisplayed at teaching mode.SHIFT Button Press this to shift the digit for data change.Button Press these to change data or execute selected action of parameter.Numerical value increases by pressing , ,decreases by pressing .SET ButtonPress this to shift each mode which is selected by mode switchingbutton to EXECUTION display.Mode Switching Button Press this to switch 7 kinds of mode.1) Monitor mode2) Teaching mode• Target position settings established by teaching• Test operation3) Parameter setup mode4) EEPROM write mode5) Normal auto-gain tuning mode6) Auxiliary function mode• Alarm clear• Absolute encoder clear7) Copy mode• Copying of parameters from the driver to the console.• Copying of parameters from the console to the driver.• Release of RS232 communication errorWhen RS232 communication error occurs as the Fig, below shows, release it by pressing and at the same time.• In case of communication with RS232 only1 sec[flashes for approx. 0.6 sec each for initialization of the console]Displays version No. of micro computer of the console. (Displayed figures vary depending on the version) Initial display of LED(Determined by the setup of SV.Pr01, "Initial Status of LED".)0.6 sec 0.6 sec 0.6 secInitial Status of the Console Display (7 Segment LED)Turn on the power of the driver while inserting the console connector to the driver main body, or inserting theconsole connector to CN X4 connector.