Panasonic MINAS A4P Series Instruction Manual

Contents

Panasonic MINAS A4P Series Instruction Manual Manual pdf 21 page image

21[Before Using the Products]Before Usingthe ProductsConnectorConsole bodyCableDisplay (7-segment LED)Touch panelDisplay LED (6-digit)All of LED will flash when error occurs, and switch to error displayscreen. Display LED (in 2 digits) Parameter No. is displayed at parameter setup mode. Point No. isdisplayed at teaching mode.SHIFT Button Press this to shift the digit for data change.Button Press these to change data or execute selected action of parameter.Numerical value increases by pressing , ,decreases by pressing .SET ButtonPress this to shift each mode which is selected by mode switchingbutton to EXECUTION display.Mode Switching Button Press this to switch 7 kinds of mode.1) Monitor mode2) Teaching mode• Target position settings established by teaching• Test operation3) Parameter setup mode4) EEPROM write mode5) Normal auto-gain tuning mode6) Auxiliary function mode• Alarm clear• Absolute encoder clear7) Copy mode• Copying of parameters from the driver to the console.• Copying of parameters from the console to the driver.The data for the parameters is set after the mode has been switched to the parameter setup mode. Fordetails on operation, refer to the instruction manual provided with the console.Display/Touch panelConsoleMain BodyConsole is an option (Part No.: DV0P4420).