177[Supplement]SupplementOption part No. DV0P4170 Single phase 100V/200VApplicable driver (frame) A and B-frameManufacturer's part No. SUP-EK5-ER-6Manufacturer Okaya Electric Ind.A B C D E F G H115DV0P4180 105 95 70 43 10 52 5.5145DV0P4220 135 125 70 50 10 52 5.5KM4M4LM4M4LabelLabelABC H10FEDGEarth terminal M4M4Screw for cover M3CoverBodyTerminal cover (transparent)2 – ø4.5R Cx CxCyL LCy2 – ø4.5 x 6.7553.1±1.0100.0 ± 2.088.075.0 5.012.010.050.060.07.02.0(11.6)(13.0 )6 – M421 34Circuit diagram451263Circuit diagramL1Cx1IN OUTIN OUTR Cx1Cy1Option part No. DV0P4180 DV0P4220 3-phase 200VApplicable driver (frame) C-frame D and E-frameManufacturer's part No. 3SUP-HQ10-ER-6 3SUP-HU30-ER-6Manufacturer Okaya Electric Ind.Voltage specifications for driverVoltage specifications for driverPower Supply100V type : Single phase, 100V +10% to 115V +10% 50/60Hz(A, B and C-frame) –15% –15%200V type : Single phase, 200V +10% to 240V +10% 50/60Hz(B, C-frame) –15% –15%200V type : Single/3-phase, 200V +10% to 240V +10% 50/60Hz(C, D-frame) –15% –15%200V type : 3-phase, 200V +10% to 230V +10% 50/60Hz(E, F-frame) –15% –15%(1) This product is designed to be used at over-voltage category (Installation category) II of EN 50178:1997.If you want to use this product un over-voltage category (Installation category) III, install a surge ab-sorber which complies with EN61634-11:2002 or other relevant standards at the power input portion.(2) Use an insulated power supply of DC12 to 24V which has CE marking or complies with EN60950Circuit BreakerInstall a circuit breaker which complies with IEC Standards and UL recognizes (Listed and marked)between power supply and noise filter.Noise FilterWhen you install one noise filter at the power supply for multi-axes application, contact to a manufacture ofthe noise filter.
