|
176Conformity to EC Directives and UL StandardsControl boxControllerInsulated power supply for interfacePower supplyCircuit breakerProtective earth (PE)L1UCN X5CN X1CN X2CN X6MREVWL2L3L1CL2CDriverGround-fault breaker (RCD)Surge absorberNoise filterNoise filters for signal lines Noise filters for signal linesMotorMotor Motor/ Motor and driverConforms to Low- Voltage Directives Standards referenced by EMC DirectivesSubject Conformed StandardIEC60034-1 IEC60034-5 UL1004 CSA22.2 No.100 EN50178 UL508C EN55011 Radio Disturbance Characteristics of Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment EN61000-6-2 Immunity for Industrial Environments IEC61000-4-2 Electrostatic Discharge Immunity Test IEC61000-4-3 Radio Frequency Electromagnetic Field Immunity Test IEC61000-4-4 Electric High-Speed Transition Phenomenon/Burst Immunity Test IEC61000-4-5 Lightening Surge Immunity Test IEC61000-4-6 High Frequency Conduction Immunity Test IEC61000-4-11 Instantaneous Outage Immunity TestEC DirectivesThe EC Directives apply to all such electronic products as those having specific functions and have beenexported to EU and directly sold to general consumers. Those products are required to conform to the EUunified standards and to furnish the CE marking on the products.However, our AC servos meet the relevant EC Directives for Low Voltage Equipment so that the machine orequipment comprising our AC servos can meet EC Directives.EMC DirectivesMINAS Servo System conforms to relevant standard under EMC Directives setting up certain model (condi-tion) with certain locating distance and wiring of the servo motor and the driver. And actual working conditionoften differs from this model condition especially in wiring and grounding. Therefore, in order for the machineto conform to the EMC Directives, especially for noise emission and noise terminal voltage, it is necessary toexamine the machine incorporating our servos.Conformed StandardsIEC : International Electrotechnical CommissionEN : Europaischen NormenEMC : Electromagnetic CompatibilityUL : Underwriters LaboratoriesCSA : Canadian Standards AssociationUse options correctly after reading operation manuals of the options to better understand the precautions.Take care not to apply excessive stress to each optional part.Composition of Peripheral EquipmentsInstallation EnvironmentUse the servo driver in the envi-ronment of Pollution Degree 1 or2 prescribed in IEC-60664-1 (e.g.Install the driver in control panelwith IP54 protection structure.)
|
