723-5-3 Character entry per trigger: SINWhen “Characters specified by SIN command” is set for character objects or barcode/2D code objects, input characterswith this command. Send this command per each marking.⿎ Setting request dataStartcode SIN S [String No.] [Marking character]Max. 200-byte(Checksum) End code⿎ Data descriptionName(> Name in LP-400/V)Data length[byte] Data contents RemarksString No.(> Serial data No.) 2 “00”–“15”If the string No. is not set in the selectedfile, the SIN command can not beaccepted.Marking character Min. 0Max. 198The number of input characters allowedis max. 99 characters.Input Method: either ASCII code orShift JIS code (can not be mixed)• The ASCII code and Shift JIS codecan not be mixed in one command.• Including these characters, max.299 digits of characters in total canbe set in one character object orbarcode/2D code object.Total data length Max. 200 Variable length.ンㄆㄇㄆㄓㄆㄏㄆ• Refer to “2-3-5 Character data input method” (P.37) for details on the character input method and character types withinput restrictions.• To use this SIN command, set “Characters specified by SIN command” of the functional character to the file in LaserMarker NAVI smart beforehand.• When the file with “Characters specified by SIN command” function is selected, transmit this command by every markingtriggers. Otherwise marking trigger ready does not turn ON, and marking is not available.• Characters specified by SIN command cannot be set together with the following functions in one file.• Registered characters (via I/O)• External offset function by I/O• On-the-fly marking at regular intervals• On-the-fly marking with multiple triggers• SIN command can be accepted even without marking character data.⿎ Example of command settingsCondition: String No. = 0, Marking character = abcd• Setting Transmission data [STX] SIN S 00abcd [CR]Condition: String No. = 0, No marking character (blank)• Setting Transmission data [STX] SIN S 00 [CR]ME-LP-GS-SR-COMP-3
