1053-8 Command for graphic data settings3-8-1 Graphic file (VEC format file) : CDFSets the graphic file (VEC format) used for the graphic object.⿎ Setting request data / response data for readoutStartcode CDF Subcommand[Object No.] [Graphic file name]Max. 256-byte(Checksum) End codeSub command is “S” for the setting request data and “A” for the response data for readout.⿎ Readout request dataStartcode CDF R [Object No.]2-byte(Checksum) End code⿎ Data descriptionName(> Name in LP-400/V)Data length[byte] Data contents RemarksObject No.(> Logo No.) 2 “00”–“15”: Object No. 1200 to 1215Graphic file name Min. 1Max. 254The number of input charactersallowed: 5 to 127 characters(including the extension “.VEC”)Input Method: ASCII code or ShiftJIS code (can be mixed)• The file extension “.VEC” can beomitted.• In the response data for readout the fileextension “.VEC” is included.• Use the ASCII code to specify one-bytecharacters (single byte characters).• Use the Shift JIS code to specifytwo-byte characters (double bytecharacters).• You cannot delete a graphic file (cannotspecify it with 0-byte).Total data length Max. 256 Variable length.ンㄆㄇㄆㄓㄆㄏㄆ• Files configurable with this command are the graphic files (VEC format) saved in the laser marker.• If the object type set in the specified object number is not the graphic (VEC), the laser marker returns the negativeresponse.• This command cannot be used for other than VEC format graphic, such as DXF, BMP, JPEG or HPGL etc.• Refer to “2-3-5 Character data input method” (P.37) for details on the character input method and character types withinput restrictions.• Graphic file names are not case-sensitive.• If the graphic file name contains both the one-byte characters and two-byte characters, specify them exactly as they arein the ASCII code and the Shift JIS code.• If the file name contains any characters which belong to the non-supported character code, the file cannot be selectedby the command.⿎ Example of command settingsCondition: Object No. = 1, Graphic file name = Abcd.VEC• Setting Transmission data [STX] CDF S 01Abcd [CR]• Readout Transmission data [STX] CDF R 01 [CR]Response data [STX] CDF A 01Abcd.VEC [CR]ME-LP-GS-SR-COMP-3
