873-7 Bar Code/2D Code Settings Commands3-7-1 Bar code/2D code characters (by ASCII code): BCSSets the characters to encode of the bar code/2D code objects by the ASCII code. Alpha-numeric characters and symbolsare available.⿎ Setting request data / response data for readoutStartcode BCS Subcommand[Object No.] [String No.] [Code data]At setting: Max. 33-byteAt readout: Max. 63-byte(Checksum) End codeSub command is “S” for the setting request data and “A” for the response data for readout.⿎ Readout request dataStartcode BCS R[Object No.] [String No.]2-byte or3-byte (2D side of composite code)(Checksum) End code⿎ Data descriptionName(> Name in LP-400/V)Data length[byte] Data contents RemarksObject No.(> Bar code No.) 1 “0”–“7”: Object No. 1100 to 1107String No.1or2For bar code/ 1D side of compositecode:“1”–“2”• The string No. is applied to the linefeedof the human readable character. Thelinefeed is not included in the code data.• If the code data length is more than 30-byte, set the character in the severalstring No. They are connected togetherin numerical order without linefeed tocreate the code data.• For EAN/UPC/JAN or 1D side of GS1DataBar Limited/Stacked, set “1” always.• Only for 2D side of the composite code,set this item with 2-byte length.For 2D code:“1”–“9”For 2D side of composite code:“01”–“09”Code data Min. 0Max. 30 Input Method: ASCII code• Functional characters cannot be used.• Specify 0-byte for data length to deletecharacters.• If the readout data includes charactersthat cannot be expressed in ASCII codesuch as Japanese characters (2-bytecharacter), only these 2-byte charactersare read out in shift JIS code.• If the code data contains any functionalcharacters or 2-byte characters, themaximum readout data can be 60-byte.Total data lengthMax. 32orMax. 33Variable length.• For bar code/2D code/1D side of composite code: Max. 32-byte• For 2D side of composite code: Max. 33-byte• Response data for readout: Max. 63-byteME-LP-GS-SR-COMP-3
