Panasonic LP-GS Series Serial Communication Command Manual

Also see for LP-RF Series: Serial Communication Command Guide Quick reference Operation manual Setup & maintenance guide

Contents

Panasonic LP-GS Series Serial Communication Command Manual Manual pdf 134 page image

1343-14 System Settings Command3-14-1 System clock: YMDSets the date and time of the system clock of the laser marker. Functional characters such as the current date/time, expirydate/time, and lot date/time are marked based on this system clock.⿎ Setting request data / response data for readoutStartcode YMD Subcommand[Year] [Month] [Date] [Hour] [Minute][Second]14-byte(Checksum) End codeSub command is “S” for the setting request data and “A” for the response data for readout.⿎ Readout request dataStartcode YMD R (Check sum) End code⿎ Data descriptionName Data length [byte] Data contents RemarksYear 4 “1980”–“2099” [Year]Month 2 “01”–“12” [Month]Date 2 “01”–“31” [Day]Hour 2 “00”–“23” [Hour]Minute 2 “00”–“59” [Minute]Second 2 “00”–“59” [Second]Total data length 14 The data length is fixed.ンㄆㄇㄆㄓㄆㄏ㄄ㄆ• The setting changed by this command is saved in the laser marker without overwriting to the file.⿎ Example of command settingsCondition: Year = 2014, Month = 12, Date = 10, Hour = 18, Minute = 45, Second = 00• Setting Transmission data [STX] YMD S 20141210184500 [CR]• Readout Transmission data [STX] YMD R [CR]Response data [STX] YMD A 20141210184500 [CR]ME-LP-GS-SR-COMP-3