683-4-5 File name: FNMSets the file name of the file number selected.⿎ Setting request data / response data for readoutStartcode FNM Subcommand[File name]Max. 20-byte (Check sum) End codeSub command is “S” for the setting request data and “A” for the response data for readout.⿎ Readout request dataStartcode FNM R (Check sum) End code⿎ Data descriptionName Data length[byte] Data contents RemarksFile name Min. 1Max. 20The number of input charactersallowed is 1 to 20 characters.Input Method: ASCII code or Shift JIScode (can be mixed)• Use the ASCII code to specify one-bytecharacters (single byte characters).• Use the Shift JIS code to specify two-bytecharacters (double byte characters).Total datalength Max. 20 Variable length.ンㄆㄇㄆㄓㄆㄏㄆ• Refer to “2-3-5 Character data input method” (P.37) for details on the character input method and character types withinput restrictions.• If the file name contains any characters which belong to the non-supported character code, the file name cannot bereadout.• Set one or more characters for this command. You cannot delete file names.• At LP-400/V compatible command mode, you cannot readout the file name with more than 21-byte length.⿎ Example of command settingsCondition:• SettingFile name = abcdTransmission data [STX] FNM S abcd [CR]• Readout Transmission data [STX] FNM R [CR]Response data [STX] FNM A abcd [CR]ME-LP-GS-SR-COMP-3
