90ンㄆㄇㄆㄓㄆㄏㄆ• If the object type set in the specified object number is not the bar code/2D code, the laser marker returns the negativeresponse.• Refer to “2-3-5 Character data input method” (P.37) for details on the character input method and character types withinput restrictions.• Depending on the barcode/2D code type, acceptable characters may be restricted to either single-byte characters ordouble-byte characters. In this case, the input characters are automatically converted to the accepted type.• When the code data is set in the several string No., the characters in each string No. are connected together innumerical order without linefeed to create the code data.• When the code data is set in the several string No., the total input characters should be 299 digits or less.• To input the control codes in the barcode/2D code data, refer to “Inputting control codes to bar code/2D code characterstrings” (P.39).• For response data for readout, all characters except the functional characters are readout in 2-byte characters (Shift-JIScode) regardless the settings.• When the character strings set with the functional character are readout, the setting of the functional character startingwith % are read out. The characters to mark as the functional characters, such as the counter or date and time values,are not read out.• With LP-400/V compatible command mode, you cannot readout the character strings with more than 61-byte length.• With LP-400/V compatible command mode, you cannot set and readout the strings for PDF417, iQR code, QR code forChinese characters (GB/T 18284), and CODE93.• With LP-400/V compatible command mode, you cannot set and readout the strings for QR code with the mode setting“Auto”.⿎ Example of command settingsCondition: Object No. = 0, String No. = 1, Code data (counter function and character “abcd”) = %06:C0abcd• Setting Transmission data [STX] BRS S 01%06:C0abcd [CR]• Readout Transmission data [STX] BRS R 01 [CR]Response data [STX] BRS A 01%06:C0 ａｂｃｄ [CR]ME-LP-GS-SR-COMP-3
