7 Type of manualsFor this product, the following manuals are prepared. Read each manuals and operate this product correctly and safely.Also, save the manuals for future use.Laser Safety GuideThis manual describes the items required for using this product correctly and safely. All users shall be required for read-ing this manual.Setup/Maintenance GuideThis manual describes the items required for introduction and installation of this product as well as for the maintenancework.• Product specifications, external dimensions• Installation and connection method• Signal details, I/O rating, and timing chart when I/O is used for control• Maintenance detailsLaser Marker NAVI smart Operation ManualInstruction manual for the laser marker configuration software “Laser Marker NAVI smart”. This manual describes theprocedure and method to operate the laser marker, and the screen operations to set marking contents.Mainly the users that operate this laser marker for actual marking procedure shall be required for reading this manual.Serial Communication Command GuideThis manual describes the communication commands to control this product externally using the serial communication(RS-232C/Ethernet). It describes the communication settings, communication data formats, communication commands,and the control samples.Mainly the machine builder and system integrator shall be required for reading this manual.Serial Communication Command Guide: LP-400/V compatible modeThis manual describes the communication commands to control this product externally using the compatible commandformat with the previous models of LP-400/LP-V series.Mainly the machine builder and system integrator shall be required for reading this manual.ンㄆㄇㄆㄓㄆㄏㄆ• The PDF data of each manual is included on an attached CD-ROM “Laser Marker Smart Utility”.• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.ME-LP-GS-SR-COMP-3
