Panasonic LP-GS Series Serial Communication Command Manual

Also see for LP-RF Series: Serial Communication Command Guide Quick reference Operation manual Setup & maintenance guide

Contents

Panasonic LP-GS Series Serial Communication Command Manual Manual pdf 29 page image

29⿎ Communication sequence when the marking end verification (MST) command response isenabledThe laser marker transmits the response data automatically upon completing the marking trigger processing (at the end ofmarking) with the response permission setting of the marking end verification (MST) command.This response data indicate that the marking trigger processing of the laser marker completed normally or endedabnormally by an error.For more information on this command, refer to “3-3-8 Marking end verification: MST” (P.63).• When the response permission of the marking end verification (MST) command is setLaser markerPositive response: ACK00Positive response: ACK00Marking trigger command: MRKS1Marking trigger command: MRKS1Positive response: ACK00Positive response: ACK00Positive response: ACK00Marking end verification command(Response permission specified) : MSTS1Send the next requestcommand afterconfirming the markingcompleted with MSTresponse.An alarm or a warningoccurred during the markingtrigger processing.Marking operationShutter (open) command: SHTS1Marking status response(abnormal end by an error): MSTAE…Marking status response(completed normally): MSTA0000Shutter (close) command: SHTS0External deviceME-LP-GS-SR-COMP-3