1594.7.9.b. MAC Based Access Control ConfigurationOn the 802.1x Port Base Access Control Configuration screen, pressing "M"changes the command prompt to "Select the Port based or MAC based authmode (P/M) >." Pressing "M" opens the MAC Based Access ControlConfiguration Menu as shown in Fig. 4-7-45. On this screen, you canconfigure the MAC-based access control. The supported authenticationmethods are EAP-MD5, TLS, and PEAP.Fig. 4-7-45 MAC Based Access Control ConfigurationScreen DescriptionNAS ID Displays the access ID (NAS Identifier).Port No Displays the port number.Number ofSupplicantDisplays the number of supplicants that can be authenticated by theport. The factory default setting is 512.OperationalControlDirectionDisplays the operation status of controlled direction by IEEE 802.1Xfunction.Both Unless the client is authenticated, this Switching Hub does notsend or receive packets from the port.In Unless the client is authenticated, this Switching Hub does notreceive packets from the port.AdministrativeControlDirectionDisplays the administrative status of controlled direction by IEEE 802.1Xfunction.Both Unless the client is authenticated, this Switching Hub does notsend or receive packets from the port.In Unless the client is authenticated, this Switching Hub does notreceive packets from the port.PN23249K/PN23249A Local Management SystemAdvanced Switch Configuration -> MAC Based Access Control Configuration MenuNAS ID: Nas1 Port No: 1 Number of Supplicant: 512Operational Control Direction: Both Administrative Control Direction: BothTransmit Period: 30 sec Max Request : 2 Supplicant Timeout: 30 secQuiet Period : 60 sec Serv Timeout: 30 sec Re-auth Period: 3600 secForce Auth MAC Timeout: 3600 sec Per Port Re-auth: DisabledSupplicant MAC Addr Type MAC Control Auth Status Re-auth------------------- ------- ------------------ ------------ ---------------------------------------- -----------------------------------[N]ext Page [T]ransmission Period R[e]-auth PeriodPre[v]ious Page Q[u]iet Period Re-[a]uth Status[P]ort No Ma[x]imum Request Initiali[z]ePort Auth [M]ode Server Time[o]ut [R]e-auth InitializePort [C]ontrol Supp[l]icant Timeout Delete Aut[h] MACPort Ctrl [D]irection Gue[s]t Access Mode Force Auth MAC T[i]meoutNum[b]er of Supplicant [G]uest VLAN ID [Q]uit to previous menuDe[f]ault VLAN ID D[y]namic VLAN StatusCommand>Enter the character in square brackets to select option
