524.6.6.b. RADIUS ConfigurationOn the System Security Configuration Menu, pressing "R" opens the RADIUSConfiguration Page screen, as shown in Fig. 4-6-12. In this screen, you canconfigure accessing to RADIUS server that is used in 802.1x port baseauthentication.Fig. 4-6-12 RADIUS ConfigurationScreen DescriptionNAS ID: Indicates an authentication ID (NAS Identifier).Server IPAddress:Indicates an IP address of RADIUS server. The factory default setting is0.0.0.0.Shared Secret: Indicates a common key (Shared Secret) that is used in authentication.The same key must be set between the server and the RADIUS client. Ingeneral, system manager set this secret key. The factory default settingis no secret key.ResponseTime:Indicates maximum response time for authentication request to RADIUSserver. The factory default setting is 10 seconds.MaximumRetransmission:Indicates the number of retransmission times for authentication requestto RADIUS server. The factory default setting is 3.PN23249K/PN23249A Local Management SystemSystem Security Configuration -> RADIUS Configuration MenuNAS ID: Nas1Index Server IP Address Shared Secret Response Time Max Retransmission----- ----------------- -------------------- ------------- ------------------1 0.0.0.0 10 seconds 32 0.0.0.0 10 seconds 33 0.0.0.0 10 seconds 34 0.0.0.0 10 seconds 35 0.0.0.0 10 seconds 3-------------------------------- -----------------------------------Set [N]AS IDSet Server [I]PSet Shared Se[c]retSet [R]esponse TimeSet [M]ax Retransmission[Q]uit to previous menuCommand>Enter the character in square brackets to select option
