844.7.1.e. VLAN Port Configuration MenuOn the VLAN Management Menu, pressing "S" command opens the VLANPort Configuration Menu screen, as shown in Fig. 4-7-5. In this screen, youcan configure VLAN-related settings by port.Fig. 4-7-5 VLAN Port Configuration MenuScreen DescriptionPort Displays a port number.PVID Indicates a PVID (Port VLAN ID) that has been set to the port. PVIDdisplays VLAN ID to which untagged packet should be transferred whenit was received. The factory default setting is 1. When tagged packetwas received, destination port is determined by referring the tagregardless of PVID.AcceptableTypeIndicates type of received frame.AdmitAllReceives all frames.TaggedOnlyReceives only the tagged frames.GVRP Indicates a status of GVRP. For all ports, ‘Disabled’ is the factory defaultsetting.Enabled GVRP is enabled.Disabled GVRP is disabled.PN23249K/PN23249A Local Management SystemVLAN Management -> VLAN Port Configuration MenuPort PVID Acceptable Frame Type GVRP---- ---- --------------------- --------1 1 Admit All Disabled2 1 Admit All Disabled3 1 Admit All Disabled4 1 Admit All Disabled5 1 Admit All Disabled6 1 Admit All Disabled7 1 Admit All Disabled8 1 Admit All Disabled-------------------------------- -----------------------------------[N]ext page Set [F]rame Type[P]revious Page Set [G]VRP StatusSet Port [V]ID [Q]uit to previous menuCommand>Enter the character in square brackets to select option