664.6.8.d Displaying all MAC addressesOn the Forwarding Database Information Menu, pressing "M" opens theDisplay MAC Address by MAC screen, as shown in Fig. 4-6-20. In this screen,you can display all the MAC address tables in this Switching Hub.Fig. 4-6-20 Displaying all MAC addressesScreen DescriptionAge-Out Time: Displays the age-out time to store MAC address entries in forwardingdatabase. It is equal to the time after receiving the last packet. Thefactory default setting is 300 seconds (5 minutes).MAC Address Displays the all MAC address entries.Port Displays the MAC address entries at each port.Available commands are listed below.N Display the next page.Press "N" to display the next port.P Display the previous page.Press "P" to display the previous port.A Set a time to store MAC address.Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Outtime with a value of 10 to 1000000 by seconds.Q Return to the previous menu.PN23249K/PN23249A Local Management SystemForwarding Database Menu -> Display MAC Address by MACAge-Out Time: 300 Sec.MAC Address Port----------------- ------------------------------------ -----------------------------------[N]ext Page Set [A]ge-Out Time[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select option
