4444..66..55.. PPoorrtt CCoonnffiigguurraattiioonn EExxtteennddOn the Basic Switch Configuration Menu, pressing "e" opens the PortConfiguration Extend Menu, as shown in Fig. 4-6-9. On this screen, you canconfigure port status display settings and port settings.Fig. 4-6-9 Port Configuration Extend MenuScreen DescriptionPort Displays the port number.Trunk Displays the group number for a trunked port.Type Displays the port type.100TX The port type is 10/100BASE-TX.1000T The port type is 10/100/1000BASE-T.1000X The port type is SFP extension port.Link Displays the current link status.Up A link has been established successfully.Down A link has not been established.Port Name Displays the port name.Jumbo Displays the jumbo frame settings. For all ports, 'Disabled' is the factorydefault setting.Enabled Jumbo frame is enabled.Disabled Jumbo frame is disabled.EAP PktFWDisplays the EAP packet forwarding function settings. For all ports,'Disabled' is the factory default setting. Set this item to "Discard" to discardEAP packets.Enabled The EAP Packet Forwarding function is enabled.Disabled The EAP Packet Forwarding function is disabled.PN23249K/PN23249A Local Management SystemBasic Switch Configuration -> Port Configuration Extend MenuPort Trunk Type Link Port Name Jumbo EAP Pkt FW---- ----- ----------- ---- --------------- -------- ------------1 --- 100TX Down Port_1 Disabled Disabled2 --- 100TX Down Port_2 Disabled Disabled3 --- 100TX Down Port_3 Disabled Disabled4 --- 100TX Down Port_4 Disabled Disabled5 --- 100TX Down Port_5 Disabled Disabled6 --- 100TX Down Port_6 Disabled Disabled7 --- 100TX Down Port_7 Disabled Disabled8 --- 100TX Down Port_8 Disabled Disabled9 --- 100TX Down Port_9 Disabled Disabled10 --- 100TX Down Port_10 Disabled Disabled11 --- 100TX Down Port_11 Disabled Disabled12 --- 100TX Down Port_12 Disabled Disabled-------------------------------- -----------------------------------[N]ext Page Set Port N[a]me[P]revious Page Set [J]umbo Status[Q]uit to previous menu Set [E]AP Packet ForwardingCommand>Enter the character in square brackets to select option
