9644..77..33.. PPoorrtt MMoonniittoorriinngg CCoonnffiigguurraattiioonnOn the Advanced Switch Configuration Menu, pressing "M" opens the PortMonitoring Configuration Menu screen, as shown in Fig. 4-7-11. In thisSwitching Hub, when analyzing communication using a protocol analyzer,etc., it is possible to monitor other port's packet that is hidden undernormal conditions because of being filtered. In this screen, you canconfigure a port to be monitored.Fig. 4-7-11 Port Monitoring ConfigurationScreen DescriptionMonitoring Port Indicates a port number of a port that is possible to monitor otherport's packet.Be MonitoredPort(s)Indicates a port number of a port to be monitored.Direction Indicates which packet should be monitored either the transmitpacket or the receive packet of a monitored port.Tx Monitors the transmit packet.Rx Monitors the receive packet.Both Monitors both of the transmit and receive packet.Status Indicates whether monitoring is executed or not.Enabled Monitoring the packet is underway.Disabled Monitoring the packet is not underway.PN23249K/PN23249A Local Management SystemAdvanced Switch Configuration -> Port Monitoring Configuration MenuMonitoring Port Be Monitored Port(s)--------------- -----------------------------------------------------------1 2Direction Status--------- -------------Both Disabled-------------------------------- -----------------------------------[S]et Monitoring PortSet Ports to be [M]onitoredSet Traffic [D]irection[C]hange Mirror Status[Q]uit to previous menuCommand>Enter the character in square brackets to select option
