160Transmit Period The number of seconds to wait before requesting the RADIUS server toresend an authentication request The factory default setting is 30seconds.Max Request The maximum number of times of retransmitting an authenticationrequest. The factory default setting is 2 times.SupplicantTimeoutDisplays the timeout for the client. The factory default setting is 30seconds.Quiet Period The number of seconds to wait before reattempting a failedauthentication The factory default setting is 60 seconds.Serv Timeout Timeout for the authentication server The factory default setting is 30seconds.Re-auth Period Periodic re-authentication time interval The factory default setting is3600 seconds.Force Auth MACTimeoutDisplays the time between a break of communications with a terminalwith a MAC address registered in Force Auth MAC Address anddeletion.Per Port Re-auth Displays whether the periodic re-authentication is enabled or disabled.Enabled The periodic re-authentication is performed.Disabled The periodic re-authentication is not performed.(Factory default setting)Supplicant MACAddrDisplays the MAC address of a successfully authenticated supplicant. Ifa supplicant registered in Force Authorized MAC Address iscommunicating, this field displays its MAC address.Type Displays the authentication type.Dynamic A supplicant that succeeded in the MAC basedauthentication.Static A supplicant set by Force Authorized MAC AddressConfiguration.MAC Control Set the operation mode for authentication requests.Auto The access control function is enabled. Theauthentication process relay is performed betweenthe client and authentication server.ForceUnauthorizedThe access control function is disabled. Allauthentication requests from clients are ignored.ForceAuthorizedThe access control function is disabled. The port ismade accessible without authentication. (Factorydefault setting)Auth Status Displays the authentication status.Unauthorized Indicates that the client is not authorized.Authorized Indicates that the client is authorized.Re-auth Displays whether the periodic re-authentication is enabled or disabled.Enabled The periodic re-authentication is performed.Disabled The periodic re-authentication is not performed.(Factory default setting)
