1894.7.11.b. PoE Global ConfigurationOn the Power Over Ethernet Configuration Menu, pressing "G" opens thePoE Global Configuration Menu as shown in Fig. 4-7-60. On this screen, youcan configure PoE for the entire Switching Hub.Fig. 4-7-60 PoE Global ConfigurationScreen DescriptionPower budget: Displays the maximum amount of power this Switching Hub cansupply.PowerConsumption:Displays the amount of power supplied by this Switching Hub.Power usagethreshold forsending trapDisplays the power supply threshold for sending a trap.PowerManagementMethodDisplays the power supply management method.The factory default setting is "Deny next port connection."Available commands are listed below.U Set the threshold for sending a trap.Press "U." The command prompt changes to "Enter power usage threshold>."Enter the threshold for sending a trap. When you complete the setting change,the display on the screen is automatically updated.M Set the power supply management method.PN23249K/PN23249A Local Management SystemPower Over Ethernet Configuration -> PoE Global Configuration MenuPower Budget : 175WPower Consumption : 0WPower Usage Threshold For Sending Trap: 50 %Power Management Method : Deny next port connection, regardless of priority-------------------------------- -----------------------------------Set Power [U]sageSet Power [M]anagement Method[Q]uit to previous menuCommand>Enter the character in square brackets to select option
