1494.7.6.b. Configuration of Scheduling MethodOn the Quality of Service Configuration Menu, pressing "C" opens theScheduling Method screen, as shown in Fig. 4-7-40. On this screen, you canset a scheduling method.Fig. 4-7-40 Configuration of Scheduling MethodScreen DescriptionScheduling Method: Displays the scheduling method of QoS function.Strict SPQ: Strict priority queuing (Factory defaultsetting)WeightedRound RobinWRR: Weighted round robin schedulingTraffic Class Displays the packet priority.Weight Displays a weight to distribute packets.Available commands are listed below.S Select the scheduling method of QoS function.Press "S" to change the command prompt to "Select scheduling method (S/W)>." ifStrict Priority Queuing is used, press "S." If Weighted Round Robin is used, press"W."M Set weight to priority (Traffic Class).Press "M" to change the command prompt to "Enter traffic class>." Enter TrafficClass (0 to 7). Then, the command prompt changes to "Enter weight for trafficclass #>." Enter weight (1 to 127).Q Return to the previous menu.PN23249K/PN23249A Local Management SystemQuality of Service Configuration -> Scheduling MethodScheduling Method: StrictTraffic Class Weight------------- ------0 11 22 33 44 55 66 77 8-------------------------------- -----------------------------------[S]et Scheduling MethodSet Traffic Class-Weight [M]apping[Q]uit to previous menuCommand>Enter the character in square brackets to select option
