544.6.6.c. Syslog Transmission ConfigurationOn the System Security Configuration Menu, pressing "G" opens the SyslogTransmission Configuration Page screen, as shown in Fig. 4-6-13. In thisscreen, you can set Syslog server information to send a system log.Fig. 4-6-13 Syslog Transmission ConfigurationScreen DescriptionStatus: Indicates a status of Syslog Transmission.IP Address: Indicates an IP address of Syslog server.Facility: Indicates a value of Facility.IncludeSysName/IP:Indicates information to be added.SysName Adds a SysName of this Switching Hub to a system log tobe transmitted.IP Address Adds an IP address of this Switching Hub to a system logto be transmitted.PN23249K/PN23249A Local Management SystemSystem Security Configuration -> Syslog Transmission Configuration MenuSyslog Server List:No. Status IP Address Facility Include SysName/IP---- ----------- --------------- ---------- ------------------1 Disabled 0.0.0.0 Facility02 Disabled 0.0.0.0 Facility0-------------------------------- -----------------------------------Set Server [S]tatus Set Server [I]P [Q]uit to previous menuSet Server [F]acility Set S[y]sName/IP Include [C]lear Server InformationCommand>Enter the character in square brackets to select option
