1634.7.9.c. Force Authorized MAC ConfigurationMenuOn the 802.1x Access Control Configuration screen, pressing "F" opens theForce Authorized MAC Configuration Menu as shown in Fig. 4-7-46. On thisscreen, you can configure MAC addresses of terminals to beauthorized/unauthorized without IEEE 802.1X authentication.Fig. 4-7-46 Force Authorized MAC ConfigurationScreen DescriptionMAC Address Displays the MAC address of a client to be authorized/unauthorized foraccess without authentication.Mask Displays the mask of the specified MAC address.Auth Status Displays the status of the specified authentication.ForceUnauthorizedThe access control function is disabled. Allauthentication requests from clients are ignored.Force Authorized The access control function is disabled. The port is madeaccessible without authentication. (Factory defaultsetting)Port List Displays the port to which the registered MAC address is applied.PN23249K/PN23249A Local Management System802.1x Access Control Configuration -> Force Authorized MAC Configuration MenuMAC Address Mask Auth Status Port List----------------- ---- ------------ --------------------------------------------------------- -----------------------------------[N]ext Page Add/Del MAC [A]ddr Sea[r]ch MAC AddressPre[v]ious Page Set [M]ask Bit [Q]uit to previous menuCommand>Enter the character in square brackets to select option
