1254.7.5.b. Create Classifier Configuration MenuOn the Classifier Configuration Menu, pressing "C" opens the CreateClassifier Configuration Menu, as shown in Fig. 4-7-27. On this screen, youcan create a classifier.Fig. 4-7-27 Creating ClassifierScreen DescriptionClassifier Index Displays the classifier index.Source MAC Address Displays the source MAC address.Destination MACAddressDisplays the destination MAC address.Source MAC MaskLengthDisplays the bit mask length of source MAC address.Destination MAC MaskLengthDisplays the bit mask length of destination MAC address.VLAN ID Displays the VLAN ID.DSCP Displays the DSCP value.Protocol Displays the protocol type.Source IP Address Displays the source IP address.Source Mask length Displays the bit mask length of source IP addressDestination IP Address Displays the destination IP address.Destination MasklengthDisplays the bit mask length of destination IP address.Source L4 Port Displays the source port number of TCP/UDP.Destination L4 Port Displays the destination port number of TCP/UDP.802.1p Priority Displays priority of IEEE802.1p.TCP SYN Flag Displays the TCP SYN flag.PN23249K/PN23249A Local Management SystemClassifier Configuration -> Create Classifier Configuration MenuClassifier Index :Source MAC Address : Source MAC Mask Length :Destination MAC Address : Destination MAC Mask Length:VLAN ID : 802.1p Priority :DSCP : Protocol :Source IP Address : Source IP Mask Length :Destination IP Address : Destination IP Mask Length :Source Layer 4 Port : TCP SYN Flag :Destination Layer 4 Port: ICMP Type :-------------------------------- -----------------------------------[C]lassifier Index S[o]urce IP Address[S]ource MAC Address D[e]stination IP Address[D]estination MAC Address So[u]rce Layer 4 Port[V]LAN ID Des[t]ination Layer 4 Port802.1p Pr[i]ority IC[M]P TypeDSC[P] TCP S[Y]N FlagP[r]otocol [A]pply[Q]uit to previous menuCommand>Enter the character in square brackets to select option
