374.6.3.b. SNMP Trap Receiver ConfigurationOn the SNMP Configuration Menu screen, pressing "T" opens the SNMPTrap Receiver Configuration Menu screen, as shown in Fig. 4-6-6. On thisscreen, you can set the SNMP Trap sending settings.Fig. 4-6-6 SNMP Trap Receiver ConfigurationScreen DescriptionTrap ReceiverList:Displays the IP address and the community name for the current trapreceiver.No. Displays the entry number for the trap receiver.Status Displays the trap sending setting.Enabled Sends traps.Disabled Does not send traps.Type Displays the Trap type.V1 Sends SNMPv1 traps.V2 Sends SNMPv2 traps.IP Address Displays the IP address of the trap receiver.Community Displays the current community name, set for sendingtraps.PN23249K/PN23249A Local Management SystemSNMP Configuration -> SNMP Trap Receiver Configuration MenuTrap Receiver List:No. Status Type IP Address Community---- -------- ----- --------------- ----------------------------1 Disabled v1 0.0.0.02 Disabled v1 0.0.0.03 Disabled v1 0.0.0.04 Disabled v1 0.0.0.05 Disabled v1 0.0.0.06 Disabled v1 0.0.0.07 Disabled v1 0.0.0.08 Disabled v1 0.0.0.09 Disabled v1 0.0.0.010 Disabled v1 0.0.0.0-------------------------------- -----------------------------------Set Receiver [S]tatus Set Receiver [I]P In[d]ividual Trap ConfigSet Trap [T]ype Set Receiver [C]ommunity [Q]uit to previous menuCommand>Enter the character in square brackets to select option
