1844.7.10.d. Set Querier Configuration MenuOn the IGMP Snooping Configuration Menu, pressing "C" opens the SetQuerier Configuration Menu as shown in Fig. 4-7-57.Fig. 4-7-57 IGMP Snooping Querier ConfigurationScreen DescriptionQuerier Status Displays whether IGMP Snooping Querier is enabled ordisabled.Current Role Displays the IGMP Snooping Querier status.Querier This Switching Hub is serving as Querier.None Since there is another device that sends queries,this Switching Hub has stopped sending queries.IGMP Version Displays the version of IGMP queries to be sent.Querier Interval Displays the query sending interval.Max Response Time Displays the time to wait for a response to a query.Querier Timeout Displays the time before determining that there is no longeranother Querier.TCN Query Count Displays the number of queries sent when an STP topologychange is made.TCN Query PendingCountDisplays the number of pending queries to be sent when anSTP topology change is made.TCN Query Interval Displays the interval of sending queries when an STP topologychange is made.PN23249K/PN23249A Local Management SystemIGMP Snooping Configuration -> Set Querier Configuration MenuQuerier Status : Disabled Current Role: QuerierIGMP Version : Version 2Query Interval : 60Max Response Time : 10Querier Timeout : 120TCN Query Count : 2 TCN Query Pending Count : 2TCN Query Interval : 10-------------------------------- -----------------------------------Set Qu[e]rier Status Set IGMP [V]ersion Set Query [I]ntervalSet [M]ax Response Time Set Querier [T]imeout Set TCN Query [C]ountSet TCN Query I[n]terval [Q]uit to previous menuCommand>Enter the character in square brackets to select option
