1944.7.12.a. RRP Domain Creation MenuOn the Ring Redundant Protocol Configuration screen, pressing "C" opensthe RRP Domain Creation Menu as shown in Fig. 4-7-62. On this screen, youcan create and configure a new RRP domain.Fig. 4-7-62 RRP Domain Creation MenuScreen DescriptionRRP DomainNameDisplays the domain name.RRP NodeTypeDisplays the node role.Master Displays that the Switching Hub controls the ring operation.Each domain has only one master node.Transit Displays that the Switching Hub is not a master node.Primary Port Displays the primary port.SecondaryPortDisplays the secondary port.PollingIntervalDisplays the polling interval.Fail Period Displays the timeout for polling.Control VLAN Displays the control VLAN ID.Data VLAN Displays the data VLAN ID.PN23249K/PN23249A Local Management SystemRRP Management -> RRP Domain Creation MenuRRP Domain Name : RRP Node Type :Primary Port :Secondary Port :Polling Interval : 1 Fail Period : 2Control VLAN :Data VLAN :-------------------------------- -----------------------------------Set RRP Domain [N]ame Set Node [T]ypeSet [P]rimary Port Set [S]econdary PortSet P[o]lling Interval Set [F]ail PeriodSet [C]ontrol VLAN Set [D]ata VLAN[A]pply [Q]uit to previous menuCommand>Enter the character in square brackets to select option
