1654.7.9.d. Guest/Default VLAN Configuration MenuOn the 802.1x Access Control Configuration screen, pressing "G" opens theGuest/Default VLAN Configuration Menu as shown in Fig. 4-7-47. On thisscreen, you can configure Guest Access and the default VLAN. Guest Accessis a function to assign a terminal that failed authentication or a terminalthat caused supplicant timeout to a specific VLAN. The default VLAN is aVLAN assigned when the Port Control setting is changed from Auto toForce Authorized or Force Unauthorized.Fig. 4-7-47 Guest/Default VLAN ConfigurationScreen DescriptionCurrent PVID Displays a PVID that is currently applied to the port.Auth Status Displays the authentication status.Unauthorized Indicates that the client is not authorized.Authorized Indicates that the ID is authorized.Guest Displays the VLAN ID applied to Guest Access. When Guest Access isdisabled, the field displays "----."Default Displays the VLAN ID applied when the Port Control setting is changed fromAuto to Force Authorized or Force Unauthorized. The default VLAN ID isalso applied when VLAN information cannot be obtained from theauthentication server although the dynamic VLAN is enabled and theauthentication succeeded.PN23249K/PN23249A Local Management System802.1x Access Control Configuration -> Guest/Default VLAN Configuration MenuPort Current PVID Auth Status Guest Default---- ------------ ------------ ------ -------1 1 Authorized ---- ----2 1 Authorized ---- ----3 1 Authorized ---- ----4 1 Authorized ---- ----5 1 Authorized ---- ----6 1 Authorized ---- ----7 1 Authorized ---- ----8 1 Authorized ---- ----9 1 Authorized ---- ----10 1 Authorized ---- ----11 1 Authorized ---- ----12 1 Authorized ---- ------------------------------------ -----------------------------------[N]ext Page Set [G]uest VLAN [Q]uit to previous menu[P]revious Page Set [D]efault VLANCommand>Enter the character in square brackets to select option
