1834.7.10.c. Router Port Table ConfigurationOn the IGMP Snooping Configuration Menu, pressing "T" opens the ShowRouter Port Table Menu as shown in Fig. 4-7-56.Fig. 4-7-56 Router Port Table viewScreen DescriptionVLAN ID Displays VLAN ID.Port List Displays the port list.Available commands are listed below.N Show the next page.Press "N." The screen displays the next page.P Show the previous page.Press "P." The screen displays the previous page.S Statically set a router port.Press "S." The command prompt changes to "Add or Delete Static MulticastRouter Port (A/D)>." Press "A" to add a router port. Press "D" to delete it. Afterthe entry, the command prompt changes to "Enter port number>." Enter theport number between 1 and 26.L Dynamically specify a router port.Press "L." The command prompt changes to "Set dynamic learning method(P/I/B)>." Press "P" for PIM/DVMRP dynamic learning. Press "I" for IGMPQuery. Press "B" for both.Q Return to the previous menu.PN23249K/PN23249A Local Management SystemIGMP Snooping Configuration -> Show Router Port Table MenuDynamic Detection: PIM and DVMRPVLAN ID Port List------- ----------------------------------------------------------------------------------------------------- -----------------------------------[N]ext Page [P]revious Page [Q]uit to previous menu[S]et Static Router Port Set Dynamic [L]earning MethodCommand>Enter the character in square brackets to select option
