1824.7.10.b. VLAN Filter ConfigurationOn the IGMP Snooping Configuration Menu, pressing "V" opens the ShowIGMP Snooping VLAN Filter Table Menu as shown in Fig. 4-7-55. On thisscreen, you can configure VLANs to be filtered out from the target of IGMPSnooping.Fig. 4-7-55 VLAN Filter ConfigurationScreen DescriptionVLAN ID Displays VLAN ID.Status Displays the filter status.Available commands are listed below.N Show the next page.Press "N." The screen displays the next page.P Show the previous page.Press "P." The screen displays the previous page.S Set a VLAN to be filtered.Press "S." The command prompt changes to "Enter VLAN ID >." Set the VLANID with a value between 1 and 4094.Q Return to the previous menu.PN23249K/PN23249A Local Management SystemIGMP Snooping Configuration -> Show IGMP Snooping VLAN Filter Table MenuVLAN ID Status------- -------------------------------------------- -----------------------------------[N]ext Page [S]et VLAN Filter[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select option