1874.7.11.a. PoE Port Configuration MenuOn the Power Over Ethernet Configuration Menu, pressing "P" opens thePoE Port Configuration Menu as shown in Fig. 4-7-59. On this screen, youcan configure the power supply for each port.Fig. 4-7-59 PoE Port Configuration MenuScreen DescriptionAdmin: Displays whether or not power supply is possible.Up Displays that power supply is possible.Down Displays that power supply is not possible.Status: Show the power supply status.Powered Displays that power is supplied.NotPoweredDisplays that power is not supplied.Overload Displays that power exceeding the limit is supplied.Class Displays the class selected by the classification function.Prio. Displays the power supply priority.Crit. Displays that top priority is given.High Displays that priority second to Crit. is given.Low Displays that the lowest priority is given.Limit Displays the upper limit of power supply amount. (in units of 200 mW)Pow. Displays the amount of power supply. (in units of 100 mW)Vol. Displays the voltage.Cur. Displays the current.PN23249K/PN23249A Local Management SystemPower Over Ethernet Configuration -> PoE Port Configuration MenuNo. Admin Status Class Prio. Limit(mW) Pow.(mW) Vol.(V) Cur.(mA)--- ----- -------------- ----- ------ --------- --------- --------- ----------1 Up Not Powered 0 Low 15400 0 0 02 Up Not Powered 0 Low 15400 0 0 03 Up Not Powered 0 Low 15400 0 0 04 Up Not Powered 0 Low 15400 0 0 05 Up Not Powered 0 Low 15400 0 0 06 Up Not Powered 0 Low 15400 0 0 07 Up Not Powered 0 Low 15400 0 0 08 Up Not Powered 0 Low 15400 0 0 09 Up Not Powered 0 Low 15400 0 0 010 Up Not Powered 0 Low 15400 0 0 011 Up Not Powered 0 Low 15400 0 0 012 Up Not Powered 0 Low 15400 0 0 0-------------------------------- -----------------------------------[N]ext Page Set PoE Port Admin [S]tatus[P]revious Page Set PoE Port Pr[i]oritySet PoE Port Power [L]imit [Q]uit to previous menuCommand>Enter the character in square brackets to select option
