354.6.3.a SNMP Management ConfigurationOn the SNMP Configuration Menu, pressing "M" opens the SNMPManagement Configuration Menu, as shown in Fig. 4-6-5. On this screen,you can configure the SNMP manager settings.Fig. 4-6-5 SNMP Management ConfigurationScreen DescriptionSNMPManager List:Displays the current SNMP manager settings.No. Displays the entry number on the SNMP Manager List.Status Displays the SNMP manager status.Enabled The SNMP manager is enabled.Disabled The SNMP manager is disabled.Privilege Displays the access privilege of the SNMP manager.Read-WriteBoth the read and write operations areallowed.Read-Only Only the read operation is allowed.IP Address Displays the IP address of the SNMP manager.Community Displays the current community name.PN23249K/PN23249A Local Management SystemSNMP Configuration -> SNMP Management Configuration MenuSNMP Manager List:No. Status Privilege IP Address Community---- -------- ----------- --------------- ----------------------------1 Enabled Read-Write 0.0.0.0 private2 Enabled Read-Only 0.0.0.0 public3 Disabled Read-Only 0.0.0.04 Disabled Read-Only 0.0.0.05 Disabled Read-Only 0.0.0.06 Disabled Read-Only 0.0.0.07 Disabled Read-Only 0.0.0.08 Disabled Read-Only 0.0.0.09 Disabled Read-Only 0.0.0.010 Disabled Read-Only 0.0.0.0-------------------------------- -----------------------------------Set Manager [S]tatus Set Manager [I]P [Q]uit to previous menuSet Manager P[r]ivilege Set Manager [C]ommunityCommand>Enter the character in square brackets to select option
