674.6.8.e Displaying MAC address table by VLANOn the Forwarding Database Information Menu, press "V." The commandprompt changes to "Enter VLAN ID>." Specifying a port number opens theDisplay MAC Address by VLAN ID screen as shown in Fig. 4-6-21. In thisscreen, you can display MAC Address table by VLAN.Fig. 4-6-21 Displaying MAC address table by VLANScreen DescriptionAge-Out Time: Displays a time to store MAC address table. It is equal to the time afterreceiving the last packet. The factory default setting is 300 seconds (5minutes).Select VLANID:Displays the selected VLAN ID.MAC Address Displays a MAC address in MAC address table.Port Displays a port to which the MAC address has belonged.Available commands are listed below.N Display the next page.Press "N" to display the next port.P Display the previous page.Press "P" to display the previous port.A Set a time to store MAC address.Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Outtime with a value of 10 to 1000000 by seconds.S Switch VLAN to be displayed.PN23249K/PN23249A Local Management SystemForwarding Database Menu -> Display MAC Address by VLAN IDAge-Out Time: 300 Sec. Selected VLAN ID:1MAC Address Port----------------- ------------------------------------ -----------------------------------[N]ext Page [S]elect VLAN ID[P]revious Page [Q]uit to previous menuSet [A]ge-Out TimeCommand>Enter the character in square brackets to select option
