634.6.8.b. Setting learning mode of MAC addressOn the Forwarding Database Information Menu, pressing "A" opens theMAC Learning Menu screen, as shown in Fig. 4-6-18. In this screen, you canset a learning mode of MAC address by port.Fig. 4-6-18 Learning MAC addressScreen DescriptionPort Displays a port number.MAC Learning Displays a learning method of MAC address.Available commands are listed below.N Display the next page.Press "N" to display the next port.P Display the previous page.Press "P" to display the previous port.S Switch learning mode.Press "S." The command prompt changes to "Select Port Number to be changed>."Enter a port number you wish to change the setting. Then, the command promptchanges to "Change MAC Learning Mode for port # (specified port number)>."Enter "A" when learning automatically, or "D" when not learning MAC Address.Q Return to the previous menu.Note: When IEEE802.1X port base authentication function and MAC baseauthentication function are activated, the MAC Learning Mode for aport cannot be disabled in the MAC Learning Menu.PN23249K/PN23249A Local Management SystemForwarding Database Menu -> MAC Learning MenuPort MAC Learning------ ------------1 Auto2 Auto3 Auto4 Auto5 Auto6 Auto7 Auto8 Auto9 Auto10 Auto11 Auto12 Auto-------------------------------- -----------------------------------[N]ext Page [S]et MAC Learning Mode[P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select option
