21144..99..33.. SSyysstteemm RReebboooottOn the Switch Tools Configuration Menu, pressing "R" opens the SystemReboot Menu as shown in Fig. 4-9-5. On this screen, you can reboot thisSwitching Hub.Fig. 4-9-5 System RebootScreen DescriptionReboot Status Displays whether or not the reboot command is executed.Stop Displays that the reboot command is notexecuted.Reboot Type Displays the reboot type. The factory default setting is "Normal."Normal Normal reboot is executed.Factory Default All settings are reset to factory default.Factory DefaultExcept IPAll settings except the IP address are reset tofactory default.Reboot Timer Displays the time between execution of the reboot command andactual reboot. The factory default setting is 0 seconds.Time Left Displays the time left before the system actually reboots afterexecution of the reboot command. A key entry refreshes thescreen display, allowing you to check the elapsed time.PN23249K/PN23249A Local Management SystemSwitch Tools Configuration -> System Reboot MenuReboot Status: StopReboot Type: NormalReboot Timer: 0 secondsTime Left: N/A-------------------------------- -----------------------------------Set Reboot [O]ptionStart [R]eboot ProcessSet Reboot [T]imer[Q]uit to previous menuCommand>Enter the character in square brackets to select option
