1204.7.4.i. Regional Topology InformationOn the Multiple Spanning Tree Configuration Menu, pressing "g" opens theRegional Topology Information screen, as shown in Fig. 4-7-24. This screendisplays configuration information of the spanning tree for each port.Fig. 4-7-24 Display of configuration information ofthe spanning tree for each portScreen DescriptionPort Displays the port number.Trunk Displays the group number (key) of the trunk if trunking is set.Link Displays the state of link.UP Link is established normally.DOWN Link is not established.Cist Port RegionalRootDisplays root bridge ID.Cist Port RegionalPath CostDisplays cost under transmission.Available commands are listed below.N Display the next page.Press "N" to change the display to the next page.P Display the previous page.Press "P" to change the display to the previous page.Q Return to the previous menu.PN23249K/PN23249A Local Management SystemMultiple Spanning Tree Configuration -> Regional Topology InformationPort Trunk Link Cist Port Regional Root Cist Port Regional Path Cost---- ----- ---- ----------------------- ----------------------------1 --- Down 8000 00C08Fxxxxxx 02 --- Down 8000 00C08Fxxxxxx 03 --- Down 8000 00C08Fxxxxxx 04 --- Down 8000 00C08Fxxxxxx 05 --- Down 8000 00C08Fxxxxxx 06 --- Down 8000 00C08Fxxxxxx 07 --- Down 8000 00C08Fxxxxxx 08 --- Down 8000 00C08Fxxxxxx 09 --- Down 8000 00C08Fxxxxxx 010 --- Down 8000 00C08Fxxxxxx 011 --- Down 8000 00C08Fxxxxxx 012 --- Down 8000 00C08Fxxxxxx 0-------------------------------- -----------------------------------[N]ext Page [P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select option
