1194.7.4.h. Designated Topology InformationOn the Multiple Spanning Tree Configuration Menu, pressing "I" opens theDesignated Topology information screen, as shown in Fig. 4-7-23. Thisscreen displays configuration information of the spanning tree for eachport.Fig. 4-7-23 Designated Topology InformationScreen DescriptionPort Displays the port number.Trunk Displays the group number (key) of the trunk if trunking is set.Link Displays the state of link.UP Link is established normally.DOWN Link is not established.Cist Desig.Root Displays root bridge ID.Cist Desig.Cost Displays cost under transmission.Cist Desig.Bridge Displays bridge ID of a designated bridge.Cist Desig.Port Displays port ID of a designated port. (Port ID is a combination ofport priority value and port number.)Available commands are listed below.N Display the next page.Press "N" to change the display to the next page.P Display the previous page.Press "P" to change the display to the previous page.Q Return to the previous menu.PN23249K/PN23249A Local Management SystemMultiple Spanning Tree Configuration -> Designated Topology InformationCist Cist Cist CistPort Trunk Link Desig. Root Desig. Cost Desig. Bridge Desig. Port---- ----- ---- ----------------- ----------- ----------------- -----------1 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 012 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 023 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 034 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 045 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 056 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 067 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 078 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 089 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0910 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0A11 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0B12 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0C-------------------------------- -----------------------------------[N]ext Page [P]revious Page [Q]uit to previous menuCommand>Enter the character in square brackets to select option
