442-5-3 Connection of PC (Laser marker NAVI smart)This product is set and operated with the PC with the PC configuration software “Laser Marker NAVI smart” installed andthe laser marker connected. Installation of laser marker NAVI smart• Laser Marker NAVI smart is provided in the supplied CD-ROM “Laser Marker Smart Utility”.• Install the Laser Marker NAVI smart in the following environment. For details about installation, please refer to the LaserMarker NAVI smart Operation Manual.Item Installation requirementsOS *1 Microsoft® Windows® 10 Pro 32bit, 64bitMicrosoft® Windows® 8.1 Pro 32bit, 64bitMicrosoft® Windows® 7 Professional SP1 32bit, 64bitFree area on hard disk 512MB or moreCD-ROM drive *2 1 set or moreUSB port USB 2.0LAN *3 10BASE-T or 100BASE-TXBluetooth *4 Version 2.0 / 2.1 / 3.0Memory capacity 2GB or moreCPU Equivalent to or higher than Intel Core i3Display resolution 1366 x 768 pixels or aboveDisplay size 10.6 inch or aboveOthers Pointing device such as a mouse, character input device such as a keyboard, or a touchinterface *5*1 : OS versions of which Microsoft has ended support are excluded. The CPU type, memory capacity, hard-disk space, and display function required to operate each OS should be provided in accordance with therecommendation of Microsoft. Laser Marker NAVI smart can be installed in English, German, Simplified Chineseor Japanese. It is preferred that the OS language corresponds to the installation language. If the OS language isother than these supported languages, install Laser Marker NAVI smart in English.*2 : To install “Laser Marker Smart Utility” on a PC without a CD-ROM drive, copy all CD-ROM data to the PC usingexternal storage media such as a USB flash drive before installation.*3 : Specifications to be observed for Ethernet connection.*4 : Specifications to be observed for wireless Bluetooth connection. Models with “-F” in the model code are notcompatible with Bluetooth.*5 : To use a touch interface, Windows 8.1 Pro / Windows 10 Pro is required.ンㄆㄇㄆㄓㄆㄏㄆ• If PC goes into “Sleep” when the laser marker and PC are connected online, the online connection between them isdisabled.If PC goes into sleep state in the REMOTE mode or RUN mode, the PC is disconnected but the operation state of thelaser marker (REMOTE mode or RUN mode state) are maintained.• To maintain the online connection, release the sleep setting of the PC.ME-LPGS-SM-8
