593-3-5 How to switch screensYou can switch the screen mode in the screen selection menu.ンㄆㄇㄆㄓㄆㄏㄆ• If you have configured the password on the system settings screen, you are required to enter the password when youswitch from “Monitor”, “Operator settings” or “Maintenance” screen to “Marking settings”, “Data management”, or “Systemsettings” screen.• The screen lock function by the password is disabled in offline editing.• The following screens are available in offline editing.• Marking settings• Data management• Maintenance (under the backup file editing mode only)• System settings (under the backup file editing mode only)• Only Monitor screen is available with the remote mode and RUN mode ON. When password is forgottenIf you have configured the password on the system settings screen, you are required to enter the password when youswitch from “Monitor”, “Operator settings” or “Maintenance” screen to “Marking settings”, “Data management”, or “Systemsettings” screen.If you have forgotten this password, delete the password according to the following procedure:1. If the laser marker is in the remote mode, turn the remote mode OFF.ワㄐㄕㄊㄆ• Do not delete the password with the remote mode ON.2. Exit the Laser Marker NAVI smart when it is started up.3. Double-click and execute “ClearPassword.exe” included in the attached CD-ROM “Laser MarkerSmart Utility”.You can find “ClearPassword.exe” at the following location of the CD-ROM.CD-ROM\Tools\ClearPassword.exeンㄆㄇㄆㄓㄆㄏㄆ• During the “ClearPassword.exe” running, it does not matter whether the laser marker and PC are connected or not.ME-LPGS-SM-8
