Panasonic LP-GS Series Setup & Maintenance Manual

Also see for LP-GS Series: Serial Communication Command Guide Serial Communication Command Guide Quick reference Operation manual

Contents

Panasonic LP-GS Series Setup & Maintenance Manual Manual pdf 8 page image

8 Order Placement Recommendations and ConsiderationsThe Products and Specifications listed in this document are subject to change (including specifications, manufacturing facility anddiscontinuing the Products) as occasioned by the improvements of Products. Consequently, when you place orders for these Products,Panasonic Industrial Devices SUNX asks you to contact one of our customer service representatives and check that the details listed inthe document are commensurate with the most up-to-date information.SAFETY PRECAUTIONSPanasonic Industrial Devices SUNX is consistently striving to improve quality and reliability. However, the fact remains that electricalcomponents and devices generally cause failures at a given statistical probability. Furthermore, their durability varies with useenvironments or use conditions. In this respect, check for actual electrical components and devices under actual conditions before use.Continued usage in a state of degraded condition may cause the deteriorated insulation. Thus, it may result in abnormal heat, smokeor fire. Carry out safety design and periodic maintenance including redundancy design, design for fire spread prevention, and designfor malfunction prevention so that no accidents resulting in injury or death, fire accidents, or social damage will be caused as a result offailure of the Products or ending life of the Products.The Products are designed and manufactured for the industrial indoor environment use. Make sure standards, laws and regulations incase the Products are incorporated to machinery, system, apparatus, and so forth. With regard to the mentioned above, confirm theconformity of the Products by yourself.Do not use the Products for the application which breakdown or malfunction of Products may cause damage to the body or property.i) usage intended to protect the body and ensure security of lifeii) application which the performance degradation or quality problems, such as breakdown, of the Products may directly result indamage to the body or propertyIt is not allowed the use of Products by incorporating into machinery and systems indicated below because the conformity, performance,and quality of Products are not guaranteed under such usage.i) transport machinery (cars, trains, boats and ships, etc.)ii) control equipment for transportationiii) disaster-prevention equipment / security equipmentiv) control equipment for electric power generationv) nuclear control systemvi) aircraft equipment, aerospace equipment, and submarine repeatervii) burning appliancesviii) military devicesix) medical devices (except for general controls)x) machinery and systems which especially require the high level of reliability and safetyACCEPTANCE INSPECTIONIn connection with the Products you have purchased from us or with the Products delivered to your premises, please perform anacceptance inspection with all due speed and, in connection with the handling of our Products both before and during the acceptanceinspection, please give full consideration to the control and preservation of our Products.WARRANTY PERIODUnless otherwise stipulated by both parties, the warranty period of our Products is one year after the purchase by you or after theirdelivery to the location specified by you.The consumable items such as battery, relay, filter and other supplemental materials are excluded from the warranty.SCOPE OF WARRANTYIn the event that Panasonic Industrial Devices SUNX confirms any failures or defects of the Products by reasons solely attributable toPanasonic Industrial Devices SUNX during the warranty period, Panasonic Industrial Devices SUNX shall supply the replacements ofthe Products, parts or replace and/or repair the defective portion by free of charge at the location where the Products were purchased ordelivered to your premises as soon as possible.However, the following failures and defects are not covered by warranty and we are not responsible for such failures and defects.(1) When the failure or defect was caused by a specification, standard, handling method, etc. which was specified by you.(2) When the failure or defect was caused after purchase or delivery to your premises by an alteration in construction, performance,specification, etc. which did not involve us.(3) When the failure or defect was caused by a phenomenon that could not be predicted by the technology at purchasing or contractedtime.(4) When the use of our Products deviated from the scope of the conditions and environment set forth in the instruction manual andspecifications.(5) When, after our Products were incorporated into your products or equipment for use, damage resulted which could have beenavoided if your products or equipment had been equipped with the functions, construction, etc. the provision of which is acceptedpractice in the industry.(6) When the failure or defect was caused by a natural disaster or other force majeure.(7) When the equipment is damaged due to corrosion caused by corrosive gases etc. in the surroundings.The above terms and conditions shall not cover any induced damages by the failure or defects of the Products, and not cover yourproduction items which are produced or fabricated by using the Products. In any case, our responsibility for compensation is limited to theamount paid for the Products.SCOPE OF SERVICEThe cost of delivered Products does not include the cost of dispatching an engineer, etc.In case any such service is needed, contact our sales representative.ME-LPGS-SM-8