Panasonic LP-GS Series Setup & Maintenance Manual

Also see for LP-GS Series: Serial Communication Command Guide Serial Communication Command Guide Quick reference Operation manual

Contents

Panasonic LP-GS Series Setup & Maintenance Manual Manual pdf 117 page image

1176-1 Link Control with Image CheckerThis product can be connected with specific image checker and code reader via Ethernet and control the laser markerlinking with these devices.The following series of operations related to marking can be controlled from the laser marker when the image checkerlinkage function is used. Position correction → MarkingAccording to information imported by the image checker's camera, the marking position of the laser marker is changed. Marking → Image checking (code symbol or character checking)After the marking by the laser marker, the image checker reads the marked code symbols or characters. The readout dataand marking data are collated by the image checker and the checkup result is output from the laser marker. Marking → Image checking (image capturing and inspection)After the marking by the laser marker, the image checker captures the marked image. The captured image is determined bythe image checker and the checkup result is output from the laser marker. Position correction → Marking → Image checkingThe image checking operation before marking (postion correction) and after marking (code/character checking or imagecapturing) can be combined.ンㄆㄇㄆㄓㄆㄏ㄄ㄆ• When you use the link control with an image checker, “continuous trigger” of trigger mode is not available.ME-LPGS-SM-8