Panasonic LP-GS Series Setup & Maintenance Manual

Also see for LP-GS Series: Serial Communication Command Guide Serial Communication Command Guide Quick reference Operation manual

Contents

Panasonic LP-GS Series Setup & Maintenance Manual Manual pdf 91 page image

914-5-5 Checking the I/O terminal statusCheck the I/O connection status and its operation using the functions in the PC configuration software “Laser Marker NAVIsmart” Operation procedure. I/O check monitorI/O check monitor indicates ON/OFF status of the I/O terminals on the laser marker.Open the I/O check monitor with the following procedure.1. Connect Laser Marker NAVI smart and the laser marker online.2. Click the screen selection menu and select “Monitor”.3. The I/O check monitor appears.ンㄆㄇㄆㄓㄆㄏ㄄ㄆ• The input and output status of the I/O checkmonitor is updated every 500ms.• There is a margin of error between the actualinput/output time and the ON/OFF timedisplayed on the screen. Output simulationWith the output simulation you can check the output signals of the laser marker without an actual operation.Use this function to confirm the operation of the external devices connected with the laser marker.Output simulation starts with the following procedure.1. Connect Laser Marker NAVI smart and the laser marker online.2. Click the screen selection menu and select “Maintenance”.3. Click the “Laser marker operation” icon in the left menu and select “Output simulation”.4. Output simulation table appears.Click the output terminal name to simulate, then the output status of the laser marker changes.ME-LPGS-SM-8