Panasonic LP-GS Series Setup & Maintenance Manual

Also see for LP-GS Series: Serial Communication Command Guide Serial Communication Command Guide Quick reference Operation manual

Contents

Panasonic LP-GS Series Setup & Maintenance Manual Manual pdf 12 page image

12How to Read this Document Symbol descriptionワㄐㄕㄊ㄄ㄆ “Notice” denotes any instructions or precautions for using this product. To prevent the damage ormalfunction of the product, observe these precautions fully.ンㄆㄇㄆㄓㄆㄏ㄄ㄆ “Reference” denotes any hints for operation, detail explanations, or references. Target modelThis document is subject to the following Laser Marker models.In this document, this product is called “laser marker”.If the setting contents or specifications vary by models, the target models are specified in the text.In the text, multiple models may be described collectively, as shown in the table below.Please remind that the illustration and the screen image may vary with the model.Target model Description in the textLP-GS051 LP-GS051-E LP-GS051(-E) LP-GS051 LP-GS SeriesLP-GS051-F LP-GS051-FE LP-GS051-FN LP-GS051-F(-FE/-FN)LP-GS051-L LP-GS051-LE LP-GS051-L(-LE) LP-GS051-LLP-GS051-LF LP-GS051-LFE LP-GS051-LFN LP-GS051-LF(-LFE/-LFN)LP-GS052 LP-GS052-E LP-GS052(-E) LP-GS052LP-GS052-F LP-GS052-FE LP-GS052-FN LP-GS052-F(-FE/-FN) Type of manualsFor this product, the following manuals are prepared. Read each manual and operate this product correctly and safely.Also, save the manuals for future use.Laser Safety GuideThis manual describes the items required for using this product correctly and safely. All users shall be required forreading this manual.Setup/Maintenance GuideThis manual describes the items required for introduction and installation of this product as well as for the maintenancework.• Product specifications, external dimensions• Installation and connection method• Signal details, I/O rating, and timing chart when I/O is used for control• Maintenance detailsMainly the machine builder and system integrator shall be required for reading this manual.Laser Marker NAVI smart Operation ManualInstruction manual for the laser marker configuration software “Laser Marker NAVI smart”. This manual describes theprocedure and method to operate the laser marker, and the screen operations to set marking contents.Serial Communication Command GuideThis manual describes the communication commands to control this product externally using the serial communication(RS-232C/Ethernet). It describes the communication settings, communication data formats, communication commands,and the control samples.Mainly the machine builder and system integrator shall be required for reading this manual.Serial Communication Command Guide: LP-400/V compatible modeThis manual describes the communication commands to control this product externally using the compatible commandformat with the former models of LP-400/LP-V series.Mainly the machine builder and system integrator shall be required for reading this manual.ンㄆㄇㄆㄓㄆㄏ㄄ㄆ• The PDF data of each manual is included on an attached CD-ROM “Laser Marker Smart Utility”.• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.ME-LPGS-SM-8