984-6-5 Guide laser radiation inputSupported model: LP-GS051(-L)ONOFFONOFFONOFFONOFFONOFFON (Open)OFF (Close)T3T2T1T4SHUTTER ENABLE IN (X9)SHUTTER IN (X8)SHUTTER OPEN 1 OUT (Y8)SHUTTER OPEN 2 OUT (Y9)SELECT 0 - 2 IN (No.19-21)GUIDE IN (No.23)*1*2READY OUT (Y5)Item Time RemarksT1 Max. 1 sec. There is a delay time of around 200ms to max. 1 second from turning ON/OFF ofSHUTTER IN (X8) to turning ON/OFF of SHUTTER OPEN 1 OUT (Y8) and SHUTTEROPEN 2 OUT (Y9).SHUTTER OPEN 1 OUT and SHUTTER OPEN 2 OUT will be output by the sameoperation, but their output timing has a margin of error.T2 0ms or more Turn on GUIDE IN (No.23) with the shutter closed.T3 0.5ms or more After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN, turn onGUIDE IN.T4 Max. 60 sec. The guide laser is stopped automatically after passing 1 minute from start-up.*1 : Select the indication contents of the guide laser with SELECT 0 IN to SELECT 2 IN as follows.Radiation details SELECT 0 IN (No. 19) SELECT 1 IN (No. 20) SELECT 2 IN (No. 21)Work distance OFF OFF OFFMarking image ON OFF OFFMarking field OFF ON OFFMasked objects ON ON OFF*2 : Keep the input state of SELECT 0 IN to SELECT 2 IN (No.19-21) while GUIDE IN (No.23) is turned ON.ンㄆㄇㄆㄓㄆㄏㄆ• The guide laser radiation is possible even when any of LASER STOP 1 IN (X10), LASER STOP 2 IN (X11), INTERLOCK1 (X16, X17), INTERLOCK 2 (X18, X19) of the I/O terminal block are open.• If you have configured the guide laser control method of external control to communication commands by the systemsettings of Laser Marker NAVI smart, the guide laser radiation by I/O is not possible.• Do not execute any other operation while the guide laser is emitted.• For LP-GS052 type, guide laser cannot be controlled using I/O or communication command.ME-LPGS-SM-8
