523-3 Operation by PC Configuration SoftwareYou can configure the following settings and operations with Laser Marker NAVI smart respectively when the laser markeris not connected (offline) and when the laser marker is connected (online). Offline editingThe followings are supported in the offline editing.• Create a new marking file.• Edit the existing local or network file data (individual files / backup file). Online operationsWhen you perform the following operations and settings, establish an online connection of the laser marker and LaserMarker NAVI smart.• Control the laser marker by the PC configuration software.• Edit the data registered to the laser marker.• Register the marking file created to the laser marker, etc.ンㄆㄇㄆㄓㄆㄏㄆ• Only one unit of laser marker can be connected to Laser Marker NAVI smart online at once. If more than one lasermarker is connected to one PC, switch the laser marker connected online using Laser Marker NAVI smart to configure/control each laser marker.3-3-1 Operation procedure Offline editing: Operation example from offline editing to laser marker data registrationOn the start-up screen, select the item you want to edit offline.• To create new data: Click “New marking file”• To edit the existing data: Click “Open file”Add data edited offline to the file number specified.Start up the Laser Marker NAVI smart.Offline editing: Select data to editScreen selection: Select Marking settings screenEdit the fileSave the file data on the local diskOnline Connection: Select the model to connect and its connection methodScreen selection: Select Data management screenAdd file dataME-LPGS-SM-8
