124Available commands are listed below.N Display the next page.Press "N" to change the display to the next page.P Display the previous page.Press "P" to change the display to the previous page.C Create a new classifier.Press "C" to change the screen to the Create Classifier Configuration Menu. Forthe Create Classifier Configuration Menu, see the next section of 4.7.5.b.D Delete the classifier.Press "D" to change the command prompt to "Please enter classifier index>."Enter an index of the classifier to be deleted from 1 to 65535.O Modify classifier configuration.Press "O" to change the command prompt to the Modify Classifier Menu. Set(modify) in the same as the Create Classifier Configuration Menu.M Display detailed information of the classifier.Press "M" to display the sender MAC address, receiver MAC address, 802.1p,VLAN ID, TCP SYN flag, and ICMP type information.S Display further detailed classifier information.Press "S" to display the source MAC address, destination MAC address, VLANID, source IP address, destination IP address, 802.1p priority, DSCP, protocoltype, TCP/UDP source port number, TCP/UDP destination port number, TCPSYN flag, and ICMP type information.Q Return to the previous menu.
