Panasonic M24PWR Operation Manual

Contents

Panasonic M24PWR Operation Manual Manual pdf 60 page image

60Available commands are listed below.R Set a reporting interval.Press "R." The command prompt changes to "Set report interval todaily/weekly/monthly (D/W/M)>." Enter "D" when notifying every day, or "W"when notifying every week, or "M" when notifying every month, respectively.S Set an interval to obtain samples.Press "S." The command prompt changes to "Set sample interval (1/2/3/4/5/6)>."Select a sampling interval you wish to set with a value of 1-6.1 10 minutes 2 30 minutes 3 1 hour 4 3 hours 5 6 hours 6 1 dayP Set Enable/Disable for notification of port information.Press "P." The command prompt changes to "Enable or Disable port informationattached in report (E/D)>." Enter "E" to enable, or "D" to disable notification. T Set Enable/Disable for notification of traffic information.Press "T." The command prompt changes to "Enable or Disable traffic informationattached in report (E/D)>." Enter "E" to enable, or "D" to disable notification.L Set Enable/Disable for notification of system log information.Press "L." The command prompt changes to "Enable or Disable system log attachedin report (E/D)>." Enter "E" to enable, or "D" to disable notification.F Set Enable/Disable file attachment.Press "F." The command prompt changes to "Enable or Disable attached file inreport (E/D)>." Enter "E" to enable, or "D" to disable notification.Y Set a type of attached file.Press "Y." The command prompt changes to "Set attached file type to csv/txt(C/T)>." Enter "C" to be CSV format, or "T" to be text format.A Set a port for the report.Press "A." The command prompt changes to "Enter port numbers (up to 26 ports)>."Enter a port number you wish to set with a value of 1-26.D Release a port for the report.Press "D." The command prompt changes to "Enter port numbers (up to 26ports)>." Enter a port number you wish to release setting with a value of 1-26.U Set a notification of utilization rate.Press "U." The command prompt changes to "Attach or Detach utilization in report(A/D)>." Enter "A" to notify, or "D" not to notify utilization rate.O Set a notification of the number of total frames.Press "O." The command prompt changes to "Attach or Detach total frames inreport (A/D)>." Enter "A" to notify, or "D" not to notify the number of total frames.B Set a notification of the number of broadcasts.Press "P." The command prompt changes to "Attach or Detach broadcasts in report(A/D)>." Enter "A" to notify, or "D" not to notify the number of broadcasts.M Set a notification of the number of multicasts.Press "P." The command prompt changes to "Attach or Detach multicasts in report(A/D)>." Enter "A" to notify, or "D" not to notify the number of multicasts.C Set a notification of the number of collisions.Press "P." The command prompt changes to "Attach or Detach collisions in report(A/D)>." Enter "A" to notify, or "D" not to notify the number of collisions.E Set a notification of the number of errors.Press "P." The command prompt changes to "Attach or Detach total errors in report(A/D)>." Enter "A" to notify, or "D" not to notify the number of errors.Q Return to the previous menu.